Izindandatho ze-16GA SR8 Lashukumisa Upholstery Hog
Izindandatho ze-16GA SR8 Lashukumisa Upholstery Hog
● 16 Gauge 11/16 ”umqhele c izindandatho okuyisisekelo. ● Ikhwalithi ephezulu: Yenziwe ngensimbi esezingeni eliphakeme, ukumelana nokugqwala okungcono. ● Isiphetho esifakwe ngosawoti sokumelana nokugqwala okukhulu futhi Isiminyaminya esincane kakhulu sokwenza kahle ukubaza nokuqedela. ● Umphumela omuhle wenqwaba: Yiba nomphumela omuhle wenqwaba, ngokusebenza okuhle kakhulu, ukuthembeka okuphezulu. ● Amaphuzu acijile anikeza amakhono amahle okubhoboza nokuvalwa kwendandatho okungaguquguquki. ● Impilo ende: Ukuqina okulungile, impilo yensizakalo ende, asikho isidingo sokushintsha kaningi kakhulu. ● Isicelo esifanelekayo: Kufanelekile ukubopha, ukulungisa amakheji emfuyo, amakheji wezilwane, uthango, omatilasi, njll. |
| Into: | Izindandatho ze-16GA SR8 Lashukumisa Upholstery Hog |
| Kala: | 16 Ukulinganisa |
| Uhlobo lokuvala: | Amasongo enkungu |
| Izinto: | Wire lashukumisa |
| Ukuqedela Ubuso: | Lashukumisa |
| Iphuzu: | Ubukhali, Buhlungu |
| Ububanzi Ngaphandle: | 11/16 intshi |
| Vala Ububanzi: | 9/32 intshi |
| Ubukhulu: | 1.60mm |
| Ukuphakama | 10.4mm |
| Ukupakisha: | Ama-2500 ama-pcs / ctn |
| Ukucaciswa kweHog Ring okwenziwe ngocingo | ||||||
| Isitayela | Umqhele | I-ID evaliwe | I-Wire Gauge | Amaphuzu | Ama-PC ngeBhokisi ngalinye | Amabhokisi nge-skid ngayinye |
| C | 1/2 ″ | 1/8 ″ | 16 (1.60mm) | Blunt noma Sharp | 10,000 | Amabhokisi ayi-120 |
| 11/16 ″ | 9/32 ″ | 16 (1.60mm) | Blunt noma Sharp | 2 500 | Amabhokisi angama-750 | |
| 3/4 ″ | 3/16 ″ | 16 (1.60mm) | Blunt noma Sharp | 11,000 | Amabhokisi ayi-120 | |
| 1 1/2 ″ | 9/16 ″ | 11 (3.08mm) | Blunt noma Sharp | 1,600 | 96 amabhokisi | |
| D | 9/16 intshi | I-1/4 intshi | I-16 (1.60mm) 15 (1.80mm) 14 (2.00mm) | Blunt noma Sharp | 5,000 | 375 |
| 3/4 intshi | I-1/4 intshi | I-16 (1.60mm) 15 (1.80mm) 14 (2.0mm) | Blunt noma Sharp | 10,000 | 100 | |
| 1-3 / 16 intshi | 7/16 intshi | 9 (3.66mm) | Blunt noma Sharp | 2 500 | 100 | |
1. Ukulungiswa kweGabion
2. Izikebhe zensimbi
3. Ucingo
4. Ukulungiswa kweGadernning
5. Isikhwama sokuvala
6. Omatilasi bomfula
7.Izimboni zangaphandle zilungisa njll
● Ukumelana okuhle nokugqwala.
● Intengo enhle.
● Luhlala isikhathi eside futhi eqinile.
● Ukumboza ithusi noma i-vinyl coating iyatholakala.
Qeda Qhakazile
Izihlanganisi ezikhanyayo azinawo umbozo wokuvikela insimbi futhi zingahle zivele uma zivezwe umswakama omkhulu noma amanzi. Azinconyelwa ukusetshenziswa kwangaphandle noma kumapulangwe aphathwayo, futhi kuphela kuzicelo zangaphakathi lapho kungadingeki khona ukuvikelwa kokugqwala. Izibopho ezigqamile zivame ukusetshenziselwa ukufaka ngaphakathi, ukusika nokuqeda izinhlelo.
Electro lashukumisa (EG)
Izihlanganisi ze-Electro Galvanized zinolwelwesi oluncane kakhulu lweZinc olunikeza ukuvikelwa kokugqwala. Ngokuvamile zisetshenziswa ezindaweni lapho kudingeka khona ukuvikelwa kokugqwala okuncane njengamakamelo okugeza, emakhishini nakwezinye izindawo ezingatholwa amanzi noma umswakama othile. Izipikili zokufulela zifakwe i-electro lashukumisa ngoba zivame ukufakwa esikhundleni ngaphambi kokuthi i-fastener iqale ukugqoka futhi azivezwa ezimeni zezulu ezinzima uma zifakwe kahle. Izindawo eziseduze nemingcele lapho okuqukethwe usawoti emanzini emvula kuphakeme kufanele kubhekwe isivalo esishisayo se-Hot Dip Galvanized noma i-Stainless Steel.
Insimbi Engagqwali (SS)
Izihlanganisi zensimbi engagqwali zinikela ngokuvikelwa okungcono kakhulu kokugqwala okutholakalayo. Insimbi ingaxhuma noma igqwale ngokuhamba kwesikhathi kepha ayisoze yaphelelwa amandla ngokugqwala. Izihlanganisi zensimbi engagqwali zingasetshenziselwa izicelo zangaphandle noma zangaphakathi futhi ngokuvamile zingena ngensimbi engagqwali engu-304 noma engu-316.
